Study on Preparation of Sponge Rubber Using in Bicycle and Motorcycle Tire - No Air

Thi Nga Tran1, , Quang Hao Nguyen1, Viet Hung Nguyen1
1 Công ty CP Cao su Sao Vàng - Số 231 Đường Nguyễn Trãi - Quận Thanh Xuân - Hà Nội

Main Article Content

Abstract

In this paper, preparation of sponge rubber using in bicycle/motorcycle tire was studied. It was shown that rubber mixture X5, at constant content of additives, with the 25phr of inorganic filler and 20 phr of foamer can meet requirements of Vietnamese standards on bicycle/motorcycle tire. Moreover, these mixtures were in same level in comparison with samples from imported tires. Testing of produced tires show that mixture X5 are suitable for technological line and can be used for sponge tire (no air) production in SRC.

Article Details

References

[1]. Tyre Technology –Tom French – Publishing Ltd 1988 pp 3-8
[2]. The valderbilt Rubber handbook BT valderbilt company Inc 1990. pp 674-680
[3]. Standar ASTM D2084-17. Standart test method for rubber property-Vulcanization using oscillating disk cure meter, compounds, ODR oscillating disk cure meter, vulcanization charaterist
[4]. Tiêu chuẩn TCVN 4509:2006: Cao su lưu hoá hoặc nhiệt dẻo-Xác định tính chất ứng suất- giãn dài khi kéo
[5]. Flexsys compounders handbook-2004. Chemicals for the rubber industry, pp. 71, 89, 139-147, 221-222.
[6]. Tiêu chuẩn Việt Nam TCVN 1591-2:2006 phần 2: lốp xe đạp
[7]. Tiêu chuẩn Việt Nam TCVN 5721-2:2002 phần 2: lốp xe máy.