Research, Design and Develop a prototype of Multi-Spindle Drilling Head
Main Article Content
Abstract
In recent years, the study of machine tool technology has got strong attention to expand development in universities, research institute and also in industry. However, there are a few publications/papers related a design and application of the multi-spindle drilling which flexibly adjusts parameters such as the number and the position of holes. In this research, the author will present a new design of a multi-spindle drilling head that uses Cardan universal joint for driving in order to increase productivity, decrease product expenses. To check the principle of working after simulation we developed a prototype of Multi-Spindle drilling head in this research.
Keywords
Tool machine, multi-spindle drilling, drill systems, Cardan universal joint
Article Details
References
[1] A.S.Udgave and Prof.V.J.Khot, “Design & development of multi-spindle drilling head (msdh)”, IOSR Journal of mechanical and civil engineering, ISSN: 2278-1684, PP: 60-69.
[2] Bajirao H. NangarePatil, and P. R. Sawant, “Design and Development of Gearbox for Multi-Spindle Drilling Machine (SPM)”, International Journal of engineering research & Technology (IJERT) Volume 2, Issue 5, ISSN: 2278-0181, May-2013.
[3] Prof. Ms.A.A.Shingavi, Dr.A.D.Dongare, and Prof. S.N.Nimbalkar, “Design of multiple spindle drilling machine”, International Journal of research in advent technology (E-ISSN: 2321-9637) Special Issue 1st International conference on advent trends in engineering, science, and technology (ICATEST 2015), 08 March 2015.
[4] M.B. Bankar, P.B. Kadam, M.R.Todkar, “Improvement in design & manufacturing process of multiple spindle drilling attachment”, IOSR Journal of Engineering, Volume 3, Issue 1, Jan 2013, page 38-43.
[5] Shinde Nikhil, “Design & Development of Twin Drill Head Machine and Drilling Depth Control”, International Journal of Innovative Research in Science, Engineering, and Technology, ISSN (Print): 2347 – 6710, Vol. 4, Issue 5, May 2015.
[6] U. Deepak, C.Tharun Prabhakar, P.M.Prasanth, S.Manikandan, “Multi Spindle Drilling Machine”, International Conference on Latest Innovations in Applied Science, Engineering, and Technology (ICLIASSET 2017), March 2017, page 143-149.
[7] A.M.Takale, V.R.Naik, “Design & Manufacturing of Multi spindle drilling head for its cycle time optimization”, International Journal of Mechanical Engineering applications Research – IJMEAR, Vol 03, Issue 01, January-April 2012.
[8] Olga Guschinskaya, Alexandre Dolgui, Nikolai Guschinsky, and Genrikh Levin, “Scheduling for multi-spindle head machines with a mobile table”, January 2007 (Research report 2007 – 500 – 002).
[9] C.K. Chen, F. Freudenstein, “Dynamic analysis of a universal joint with manufacturing tolerances”, J. Mech. Transm. Autom. Des., 108 (1986), pp. 524-532.
[10] F. Freudenstein, J.P. Macey, “The inertia torques of the Hooke’s joint”, Proc. of the 21st Biennial ASME Mechanisms Conference, Chicago24 (1990), pp. 407–413.
[11] J. Porat, “Moment transmission by a universal joint”, J. Mech. Mach. Theory, 15 (4) (1980), pp. 245–254.
[12] F. Dudeza, “Transmissions par Cardan” Editions Eyrolles, Paris (1971).
[13] E.R. Wagner, C.E. Cooney, “Cardan or Hooke Universal Joint in Universal Joint and Driveshaft Design Manual” Society of Automotive Engineers, Warrendale (1979), pp. 39–75.
[14] M.E. Biancolini, C. Brutti, E. Pennestrì, P.P. Valentini, “Dynamic mechanical efficiency and fatigue analysis of the double Cardan homokinetic joint” Int. J. Veh. Des., 32 (2003), pp. 231–249.
[15] J. Fischer, F. Freudenstein, “Internal force and moment transmission in a Cardan joint with manufacturing tolerances” J. Mech. Transm. Autom. Des., 106 (1984), pp. 301–311.
[16] Dang Vu Giao, Nguyen Duc Loc, “Handbook design technology manufacturing machine”, Hanoi University of Science and Technology, 1985.
[17] PGS.TS. Trịnh Chí GS.Lê Văn Uyên, “Giáo trình Tính toán thiết kế hệ thống dẫn động cơ khí tập 1,2”, NXB Giáo Dục (VIETNAMESE).
[2] Bajirao H. NangarePatil, and P. R. Sawant, “Design and Development of Gearbox for Multi-Spindle Drilling Machine (SPM)”, International Journal of engineering research & Technology (IJERT) Volume 2, Issue 5, ISSN: 2278-0181, May-2013.
[3] Prof. Ms.A.A.Shingavi, Dr.A.D.Dongare, and Prof. S.N.Nimbalkar, “Design of multiple spindle drilling machine”, International Journal of research in advent technology (E-ISSN: 2321-9637) Special Issue 1st International conference on advent trends in engineering, science, and technology (ICATEST 2015), 08 March 2015.
[4] M.B. Bankar, P.B. Kadam, M.R.Todkar, “Improvement in design & manufacturing process of multiple spindle drilling attachment”, IOSR Journal of Engineering, Volume 3, Issue 1, Jan 2013, page 38-43.
[5] Shinde Nikhil, “Design & Development of Twin Drill Head Machine and Drilling Depth Control”, International Journal of Innovative Research in Science, Engineering, and Technology, ISSN (Print): 2347 – 6710, Vol. 4, Issue 5, May 2015.
[6] U. Deepak, C.Tharun Prabhakar, P.M.Prasanth, S.Manikandan, “Multi Spindle Drilling Machine”, International Conference on Latest Innovations in Applied Science, Engineering, and Technology (ICLIASSET 2017), March 2017, page 143-149.
[7] A.M.Takale, V.R.Naik, “Design & Manufacturing of Multi spindle drilling head for its cycle time optimization”, International Journal of Mechanical Engineering applications Research – IJMEAR, Vol 03, Issue 01, January-April 2012.
[8] Olga Guschinskaya, Alexandre Dolgui, Nikolai Guschinsky, and Genrikh Levin, “Scheduling for multi-spindle head machines with a mobile table”, January 2007 (Research report 2007 – 500 – 002).
[9] C.K. Chen, F. Freudenstein, “Dynamic analysis of a universal joint with manufacturing tolerances”, J. Mech. Transm. Autom. Des., 108 (1986), pp. 524-532.
[10] F. Freudenstein, J.P. Macey, “The inertia torques of the Hooke’s joint”, Proc. of the 21st Biennial ASME Mechanisms Conference, Chicago24 (1990), pp. 407–413.
[11] J. Porat, “Moment transmission by a universal joint”, J. Mech. Mach. Theory, 15 (4) (1980), pp. 245–254.
[12] F. Dudeza, “Transmissions par Cardan” Editions Eyrolles, Paris (1971).
[13] E.R. Wagner, C.E. Cooney, “Cardan or Hooke Universal Joint in Universal Joint and Driveshaft Design Manual” Society of Automotive Engineers, Warrendale (1979), pp. 39–75.
[14] M.E. Biancolini, C. Brutti, E. Pennestrì, P.P. Valentini, “Dynamic mechanical efficiency and fatigue analysis of the double Cardan homokinetic joint” Int. J. Veh. Des., 32 (2003), pp. 231–249.
[15] J. Fischer, F. Freudenstein, “Internal force and moment transmission in a Cardan joint with manufacturing tolerances” J. Mech. Transm. Autom. Des., 106 (1984), pp. 301–311.
[16] Dang Vu Giao, Nguyen Duc Loc, “Handbook design technology manufacturing machine”, Hanoi University of Science and Technology, 1985.
[17] PGS.TS. Trịnh Chí GS.Lê Văn Uyên, “Giáo trình Tính toán thiết kế hệ thống dẫn động cơ khí tập 1,2”, NXB Giáo Dục (VIETNAMESE).