Experiments to Measure the Sorption Isotherm of Gamma Alumina (γ-Al2O3)
Main Article Content
Abstract
Gamma Alumina (γ-Al2O3) is a material with many good properties such as small pore size, high specific surface area, highly hygroscopic, low melting temperature, ...These characters are very suitable for making adsorbent and catalyst carriers. Gamma alumina is widely applied in many industries such as petrochemical industry, chemical industry, pharmaceutical industry, ...Study of γ-Al2O3 is very important. One of the most important characters of γ-Al2O3 is the sorption isotherm. This work will present the experimental results to determine the sorption isotherm of γ-Al2O3. Comparison between experimental results and Lanmuir, (Brunauer, Emmett and Teller) BET models is also introduced.
Keywords
Gamma alumina (γ-Al2O3), sorption isotherm, catalysis
Article Details
References
[1] Bùi Vĩnh Tường, Hà Lưu Mạnh Quân, Lê Phúc Nguyên, Đặng Thanh Tùng, Nghiên cứu tổng hợp và phát triển γ-Al2O3 từ nguồn Hydroxide nhôm Tân Bình để làm chất mang cho các hệ xúc tác sử dụng trong tổng hợp hoá dầu, Tạp chí Dầu khí, Số 4 (2013) 28–35.
[2] Almatis Inc, Adsorbents & Catalysts, Product data of Activated Alumina F-200 (2005).
[3] Krischer, O. and Kast W., Die wissenschaftlichen Grundlagen der Trocknungstechnik, erster Band, dritte Auflage, Springer, Berlin (1992).
[4] Dullien, F. A. L., Porous media: Fluid transport and pore structure, 2nd Edition, Academic Press Inc., San Diego (1992).
[5] Vu H. T., Influence of pore size distribution on drying behaviour of porous media by a continuous model. PhD Thesis, Otto-von-Guericke-Universität Magdeburg (2006).
[6] Y. Wang, J. Wang, M. Shen, W. Wang, Synthesis and properties of thermostable γ-alumina prepared by hydrolysis of phosphide aluminium, Journal of Alloys and Compounds, 467 (1-2) (2009) 405–412.
[7] Vu H. T., Metzger T., and Tsotsas E., Influence of pore size distribution via effective parameters in a continuous drying model. Drying Technology (2006) 554–561.
[8] Vu Hong Thai, Vu Dinh Tien, On Forward and Inverse Problem in Studying the Drying Behavior of Porous Media, Journal of Science & Technology, No. 93 (2013) 1–7.
[9] Vũ Hồng Thái, Ứng dụng mô hình liên tục trong nghiên cứu quá trình sấy vật liệu xốp: ảnh hưởng của kích thước vật liệu, Tạp chí Hoá học, Số 55 2e (2017) 45–49.
[2] Almatis Inc, Adsorbents & Catalysts, Product data of Activated Alumina F-200 (2005).
[3] Krischer, O. and Kast W., Die wissenschaftlichen Grundlagen der Trocknungstechnik, erster Band, dritte Auflage, Springer, Berlin (1992).
[4] Dullien, F. A. L., Porous media: Fluid transport and pore structure, 2nd Edition, Academic Press Inc., San Diego (1992).
[5] Vu H. T., Influence of pore size distribution on drying behaviour of porous media by a continuous model. PhD Thesis, Otto-von-Guericke-Universität Magdeburg (2006).
[6] Y. Wang, J. Wang, M. Shen, W. Wang, Synthesis and properties of thermostable γ-alumina prepared by hydrolysis of phosphide aluminium, Journal of Alloys and Compounds, 467 (1-2) (2009) 405–412.
[7] Vu H. T., Metzger T., and Tsotsas E., Influence of pore size distribution via effective parameters in a continuous drying model. Drying Technology (2006) 554–561.
[8] Vu Hong Thai, Vu Dinh Tien, On Forward and Inverse Problem in Studying the Drying Behavior of Porous Media, Journal of Science & Technology, No. 93 (2013) 1–7.
[9] Vũ Hồng Thái, Ứng dụng mô hình liên tục trong nghiên cứu quá trình sấy vật liệu xốp: ảnh hưởng của kích thước vật liệu, Tạp chí Hoá học, Số 55 2e (2017) 45–49.