Design and Development of a Constant Volume Combustion Chamber for Fuel Spray and Combustion Studies under Compression Ignition Engine Conditions

Van Thu Hoang1,2, Huu Tuyen Pham3, , Van Nghia Do3, Huu Tuan Nguyen3
1 School of Mechanical Engineering, Hanoi University of Science and Technology
2 Vinh University of Technology Education, Nghean, Vietnam
3 Hanoi University of Science and Technology

Main Article Content

Abstract

Constant Volume Combustion Chambers (CVCCs) are widely used to investigate fuel spray and combustion processes under well-controlled conditions. However, such facilities are currently unavailable in Vietnam, where compression ignition (CI) engine research mainly relies on conventional engine test benches with limited flexibility for fundamental combustion studies. This paper presents the design, fabrication, and experimental validation of a CVCC developed for diesel spray and combustion research under CI engine conditions. The design considered chamber geometry, dimensions, materials, durability, efficiency, and operational safety. Structural and thermal analyses were performed using finite element methods in ANSYS to ensure mechanical strength and thermal stability while maintaining a compact and cost-effective configuration. The simulations predicted maximum Von Mises stresses of 20.4 MPa in the chamber body and 27.7 MPa in the flange cover, with a maximum deformation of only 0.002 mm, confirming adequate structural integrity under the design operating conditions. The CVCC was fabricated using locally available manufacturing processes and integrated with gas supply, electrical heating, pressure measurement, optical diagnostics, and a common-rail diesel injection system. Experimental results demonstrated stable fuel spray development and combustion under elevated pressure and temperature conditions. Measurements of flame evolution, in-chamber pressure, and heat release rate confirmed reliable operation and suitability for combustion diagnostics. The developed CVCC provides an important experimental platform for fundamental CI combustion research in Vietnam and supports future investigations of alternative and low-carbon fuels.

Article Details

References

[1] A. Hajialimohammadi, S. Ahmadisoleymani, A. Abdullah, O. Asgari, and F. Rezai, Design and manufacturing of a constant volume test combustion chamber for jet and flame visualization of CNG direct injection, Applied Mechanics and Materials, vols. 217–219, pp. 2539–2545, Nov. 2012. https://doi.org/10.4028/www.scientific.net/AMM.217-219.2539
[2] R. Munsin, C. Bodin, S. Lim, K. Phunpheeranurak, T. Phongphankasem, Y. Laoonual, S. Jugjai, and S. Chanchaona, Design of constant volume combustion chamber (CVCC) with pre-combustion technique for simulation of CI engine conditions, Proceedings of the 4th TSME International Conference on Mechanical Engineering (TSME-ICOME), Oct. 2013.
[3] M. Ul Haq, A. T. Jafry, S. Ahmad, and A. Muzaffar, Design and development of a control volume spray chamber (CVSC) for fuel spray visualization, Engineering Proceedings, vol. 23, no. 1, Art. no. 35, Aug. 2022. https://doi.org/10.3390/engproc2022023035
[4] V. T. Chau, T. D. Long, H. B. Vang, D. H. Long, and N. H. Huong, Design of a constant volume combustion chamber with optical approach technique, Journal of Science and Technology, vol. 64, no. 4, pp. 53–61, Sep. 2023. https://doi.org/10.46242/jstiuh.v64i04.4889
[5] N. P. Truong, N. X. Khoa, and N. V. Tuan, Building a research model for the combustion process of fuel in a constant volume combustion chamber, International Journal of Sustainable Engineering, vol. 17, iss. 1, pp. 263–277, Mar. 2024.
https://doi.org/10.1080/19397038.2024.2329178
[6] N. T. Tien, Principles of Internal Combustion Engines, Hanoi, Vietnam: Education Publishing House, 2003. pp. 137-138
[7] J. B. Heywood, Internal Combustion Engine Fundamentals, New York, NY, USA: McGraw-Hill, p. 668, 1988.
[8] K. Mollenhauer and H. Tschöke, Handbook of Diesel Engines, Berlin, Germany: Springer, 2010, p. 539. https://doi.org/10.1007/978-3-540-89083-6
[9] R. S. G. Baert, P. J. M. Frijters, B. Somers, C. C. M. Luijten, and W. de Groot, Design and operation of a high pressure, high temperature cell for HD diesel spray diagnostics: Guidelines and results, SAE Technical Paper, no. 2009-01-0649, Apr. 2009.
https://doi.org/10.4271/2009-01-0649
[10] Sandia National Laboratories, Combustion vessel geometry, Sandia National Laboratories, Diesel Spray Combustion Research, 2026. Online. Available: https://ecn.sandia.gov/diesel-spray-combustion/sandia-cv/combustion-vessel-geometry/, Accessed on: August 10, 2026
[11] D. L. Siebers and C. F. Edwards, Autoignition of methanol and ethanol sprays under diesel engine conditions, SAE Technical Paper, no. 870588, Feb. 1987. https://doi.org/10.4271/870588
[12] D. Honnery and D. Nguyen, Combustion of bio-oil ethanol blends at elevated pressure, Fuel, vol. 87, iss. 2, pp. 232–243, Feb. 2008. https://doi.org/10.1016/j.fuel.2007.04.023
[13] D. N. Nguyen, H. Ishida, and M. Shioji, Ignition delay and combustion characteristics of gaseous fuel jets, Journal of Engineering for Gas Turbines and Power, vol. 132, iss. 4, Apr. 2010. https://doi.org/10.1115/1.4000115
[14] H. Fujimoto, K. Higashi, T. Yamashita, and J. Senda, Effects of ambient temperature and oxygen concentration on soot behavior in diesel flame, SAE Technical Paper, no. 2005-24-007, Sep. 2005. https://doi.org/10.4271/2005-24-007
[15] MatWeb, JIS S45C Steel, Tempered, MatWeb, LLC, materials property database. Online. Available: https://www.matweb.com/search/datasheet_print.aspx?matguid=6b29957fc95e426d87dff64d67c59f6c, Accessed on: April 20, 2026
[16] Technical Glass Products, Quartz technical data, Technical Glass Products / 2SPI. Online. Available: Online. Available:
https://www.2spi.com/catalog/documents/QuartzTechnicalData.pdf, Accessed on: April 20, 2026
[17] G. Chanakya and P. Kumar, Investigation of thermal adiabatic boundary condition on semitransparent wall in combined radiation and natural convection, International Journal for Computational Methods in Engineering Science and Mechanics, vol. 23, no. 4, pp. 349–366, 2022. https://doi.org/10.1080/15502287.2021.1964639