Characterization of Screened Municipal Solid Waste and Assessment of the Application Potential of Refuse-Derived Fuel for Coal Replacement in Vietnam
Main Article Content
Abstract
Approximately 2 billion tonnes of municipal solid waste (MSW) are generated worldwide each year, posing significant environmental and waste management challenges. This study investigates the physicochemical characteristics, fuel properties, and energy-recovery potential of the oversized fraction of MSW (>40 mm) for refuse-derived fuel (RDF) production. Without source separation, the screened fraction primarily consists of plastics, paper, textiles, and rubber, making it suitable for conversion into a secondary fuel. The screened MSW exhibited an average moisture content of 32.32 wt%, which can be substantially reduced through appropriate pretreatment, and a higher heating value (HHV) of 25.96 MJ/kg, indicating considerable energy-recovery potential. The average ash content was 22.97 wt%, while carbon and hydrogen contents ranged from 50–60 wt% and 6–8 wt%, respectively. The addition of black liquor can improve pellet binding, enabling pelletization at lower pressing temperatures and reducing electricity consumption, while CaO can promote reactions with sulfur and chlorine during combustion, potentially reducing the formation of toxic gaseous emissions. An economic assessment estimated annual savings of approximately $M 20.2 from partial fossil-fuel substitution in a representative Vietnamese cement plant. Furthermore, 5% co-firing of RDF derived from screened MSW in Vietnam’s coal-fired power plants could potentially reduce annual coal expenditures by approximately $M 225. Compared with conventional studies on MSW-derived RDF, this work provides an integrated assessment of fuel properties and practical energy-recovery potential. The findings demonstrate the significant potential of screened MSW for RDF production, fossil-fuel substitution, energy recovery, and sustainable waste management.
Keywords
Coal replacement, municipal solid waste, refuse-derived fuel, waste-to-energy.
Article Details

This work is licensed under a Creative Commons Attribution 4.0 International License.
References
[2] A. Kumar, E. Singh, R. Mishra, S. L. Lo, and S. Kumar, Global trends in municipal solid waste treatment technologies through the lens of sustainable energy development opportunity, Energy, vol. 275, Jul. 2023, Art. no. 127471. https://doi.org/10.1016/j.energy.2023.127471
[3] A. Maalouf, A. Mavropoulos, and M. El-Fadel, Global municipal solid waste infrastructure: Delivery and forecast of uncontrolled disposal, Waste Management and Research, vol. 38, pp. 1028–1036, Sep. 2020. https://doi.org/10.1177/0734242X20935170
[4] V. E. Agency, National environmental status report 2023, 2023.
[5] D. X. Truong, Investigation of the status and the prospect of fuel pellet production and utilisation toward net zero emissions by 2050 in Vietnam, Vietnam Journal of Science, Technology and Engineering, vol. 66, no. 4, pp. 113–124, Dec. 2024. https://doi.org/10.31276/VJSTE.2024.0002
[6] United Nations Environment Programme (UNEP), From pollution to solution: A global assessment of marine litter and plastic pollution, Environment Programme, Nairobi, Kenya, May 2021.
[7] United Nations Environment Programme (UNEP), Single-Use Plastics: A Roadmap for Sustainability, Gigiri, Nairobi, Kenya, 2018.
[8] Intergovernmental Panel on Climate Change, Climate change 2021: Mitigation of climate change, Geneva: Switzerland, 2021.
[9] Ministry of Natural Resources and Environment, National environmental status report 2020: Household solid waste management, 2020.
[10] T. Etri, O. Al Samsami, and M. Baawain, Characterization of landfills solid waste in muscat and estimation of their energy recovery, Environmental Science and Pollution Research, vol. 30, no. 47, pp. 104901–104915, Sep. 2023. https://doi.org/10.21203/rs.3.rs-1948005/v1
[11] W. -T. Tsai and K. -C. Kuo, An analysis of power generation from municipal solid waste (MSW) incineration plants in Taiwan, Energy, vol. 35, pp. 4824–30, Dec. 2010. http://doi.org/10.1016/j.energy.2010.09.005
[12] A. B. Trindade, J. C. E. Palacio, A. M. González, D. J. R. Orozco, E. E. S. Lora, M. L. G. Renó, and O. A. d. Olmo, Advanced exergy analysis and environmental assesment of the steam cycle of an incineration system of municipal solid waste with energy recovery, Energy Conversion and Management, vol. 157, pp. 195–214, Feb. 2018. https://doi.org/10.1016/j.enconman.2017.11.083
[13] U. Arena, Process and technological aspects of municipal solid waste gasification: A review, Waste Management, vol. 32, no. 4, pp. 625–639, Apr. 2012. http://doi.org/10.1016/j.wasman.2011.09.025
[14] S. Jamilatun, J. Pitoyo, S. Amelia, A. Ma’arif, D. C. Hakika, I. Mufandi, Experimental study on the characterization of pyrolysis products from bagasse (Saccharum officinarum L.): Bio-oil, biochar, and gas products, Indonesian Journal of Science and Technology, vol. 7, pp. 565–82, 2022.
https://doi.org/10.17509/ijost.v7i3.51566
[15] T. R. Sarker, M. L. Khatun, D. Z. Ethen, M. R. Ali, M. S. Islam, S. Chowdhury, K. S. Rahman, N. S. Sayem, and R. S. Akm, Recent evolution in thermochemical transformaion of municipal solid wastes to alternate fuels, Heliyon, vol. 10, no. 17, 2024, Art. no. e37105.
https://doi.org/10.1016/j.heliyon.2024.e37105
[16] T. T. T. Nguyen, T. X. Vuong, T. T. H. Pham, A. Q. Hoang, M. B. Tu, and T. H. Nguyen, Comprehensive assessment of precious metal concentration, distribution, and recovery potential in municipal solid waste incineration residues from northern Vietnam. RSC Advances, vol. 16, pp. 2937–2957, no. 4, 2026. https://doi.org/10.1039/D5RA08421K
[17] ISO, ISO 18134-1:2022, Solid biofuels - Determination of moisture content, 2022. [Online]. Available: https://www.iso.org/obp/ui/en/#iso:std:83191:en
[18] ISO, ISO 18125:2017 Solid biofuels - Determination of calorific value. [Online]. Available:
https://www.iso.org/standard/61517.html
[19] ISO, ISO 18122:2022, Solid biofuels - Determination of ash content. [Online]. Available:
https://www.iso.org/standard/83190.html
[20] VICEM Hoang Mai Cement Joint Stock Company, Annual Report 2025, Nghe An, Vietnam, 2025.
[21] L. D. Long, C. T. T. Mai, T. T. Cham, Current status of production, resource consumption, and potential for resource conservation, waste reuse, and circular economy implementation in Vietnam Cement Industry, Journal of Material and Construction, vol. 15, 2025. https://doi.org/10.54772/jomc.02.2025.859
[22] Y. Ding, J. Zhao, J.-W. Liu, J. Zhou, L. Cheng, J. Zhao, Z. Shao, Ç. Iris, B. Pan, X. Li, and Z.-T. Hu, A review of China’s municipal solid waste (MSW) and comparison with international regions: Management and technologies in treatment and resource utilization, Journal of Cleaner Production, vol. 293, 2021. https://doi.org/10.1016/j.jclepro.2021.126144
[23] N. Soobhany, Assessing the physicochemical properties and quality parameters during composting of different organic constituents of municipal solid waste, Journal of Environmental Chemical Engineering, vol. 6, pp. 1979–1988, 2018. https://doi.org/10.1016/j.jece.2018.02.049
[24] T. X. Do, P. Q. Nguyen, N. H. Dang, and M. T. Nguyen, Effect of additives on the reduction of gas and particulate emissions from rice straw pellet fuel: Experimental study and modeling, Sustainable Energy Technologies and Assessments, vol. 83, 2025, Art. no.104624.
https://doi.org/10.1016/j.seta.2025.104624
[25] T. X. Do, K. T. Tran, A. T. Vu, T. D. S. Van, S. T. Le, and P. Q. Nguyen, Effects of pelletizing conditions and additives on properties of rice straw fuel pellets and ash characteristics, Biomass Conversion and Biorefinery, vol. 15, pp. 16971–16985, 2025. https://doi.org/10.1007/s13399-025-06566-w
[26] B. V. A. Pham, T. T. Trinh, T. T. Trinh, and T. M. Vu, Analysis of physicochemical characteristics of municipal solid waste in Hung Yen city, Vietnam Journal of Science and Technology - MOST 66, vol. 66, no. 10, pp. 83–88, 2022. https://doi.org/10.31276/VJST.66(10).83-88
[27] T. Wang, Y. Zhai, Y. Zhu, C. Li, and G. Zeng, A review of the hydrothermal carbonization of biomass waste for hydrochar formation: Process conditions, fundamentals, and physicochemical properties, Renewable and Sustainable Energy Reviews vol. 90, pp. 223–247, 2018.
https://doi.org/10.1016/j.rser.2018.03.071
[28] A. Zhou, Z. Hu, M. B. Ahmad, Z. Zhang, W. Yu , Y. Zhu, J. Li, X. Wang, and H. Tan, Ash fusion and migration characteristics of municipal solid waste and sewage sludge co-fring in power plants, Journal of the Energy Institute, vol. 125, Apr. 2026. https://doi.org/10.1016/j.joei.2025.102430
[29] Ha Truong, Hoang Anh Tran, M. Ha-Duong, Cost-benefit analysis of biomass co-firing with coal: The case of Ninh Binh Thermal Power Plant, HAL open science, 2016.