Research on establishing size system and designing shoe lasts for female diabetics in Vietnam
Main Article Content
Abstract
Shoe lasts are tool for designing and manufacturing shoes, mainlly deciding on the shape, fit and comfort of the shoe. The paper presents the method and results of setting up the size system and designing shoe lasts for female diabetics based on the results of studying foot shape and size, requirements of shoes for diabetics. The parameters of 7 shoe last sizes in length with 3 sizes of width/girth according to the Mondopoint international size system are built. The parameters of shoe lasts for female diabetics are much bigger than those for normal women, especially the ball is bigger than 24 mm, the ball width is larger than 6 mm. Using shoe last design software, 3D printing technology has designed and manufactured shoe lasts, that meet the requirements to make shoes for female diabetics in Vietnam.
Keywords
Shoe lasts, shoes for diabetes, size of shoe lasts
Article Details
References
[1]. TYRRELL, W. and CARTER, G. Therapeutic Footwear: A comprehensive Guide, China, ChurchHill Livingstone, Elsevier (2009).
[2]. Fukin V.A., Bùi Văn Huấn. Phát triển lý thuyết và phương pháp thiết kế phom giầy, MGUDT Moskva 2006.
[3]. Bùi Văn Huấn, Thiết lập phương pháp lấy số đo bàn chân và thiết kế phom giầy sử dụng công nghệ số và tin học, Luận án tiến sĩ, MGUDT Moskva 2006.
[4]. José Antonio Bernabéu, et al, CAD tools for designing shoe lasts for people with diabetes, Computer-Aided Design 45 (2013) 977-990.
[5]. SHUPING, X. et al., A computer-aided design system for foot-feature-based shoe last customization, International Journal of Advanced Manufacturing Technology, 46 (2010) 11-19.
[6]. Bùi Văn Huấn, Cao Thị kiên Chung, Nghiên cứu xây dựng hệ thống cỡ số bàn chân nữ bệnh nhân tiểu đường tại Hưng Yên, Tạp chí Khoa học Công nghệ các trường Đại học kỹ thuật, số 114 (2016).
[7]. Luigi Uccioli, The Role of Footwear in the Prevention of Diabetic Foot Problem, The Diabetic Foot (2006).
[8]. Van Netten et al., Diabetic Foot Australia guideline on footwear for people with diabetes, Journal of Foot and Ankle Research 11:2 (2018) 2-14.
[9]. Wright, K. and Ojo, O., Foot care for residents with type 2 diabetes, Nursing and Residential Care 12 (2010) 585-589.
[10]. Viện Nghiên cứu Da Giầy, Nghiên cứu phương pháp thiết kế và làm phom mẫu phục vụ chiến lược chủ động trong thiết kế mẫu mốt và sản xuất của ngành Giầy Việt Nam, Mã: 70-07/R-D, 2008.
[2]. Fukin V.A., Bùi Văn Huấn. Phát triển lý thuyết và phương pháp thiết kế phom giầy, MGUDT Moskva 2006.
[3]. Bùi Văn Huấn, Thiết lập phương pháp lấy số đo bàn chân và thiết kế phom giầy sử dụng công nghệ số và tin học, Luận án tiến sĩ, MGUDT Moskva 2006.
[4]. José Antonio Bernabéu, et al, CAD tools for designing shoe lasts for people with diabetes, Computer-Aided Design 45 (2013) 977-990.
[5]. SHUPING, X. et al., A computer-aided design system for foot-feature-based shoe last customization, International Journal of Advanced Manufacturing Technology, 46 (2010) 11-19.
[6]. Bùi Văn Huấn, Cao Thị kiên Chung, Nghiên cứu xây dựng hệ thống cỡ số bàn chân nữ bệnh nhân tiểu đường tại Hưng Yên, Tạp chí Khoa học Công nghệ các trường Đại học kỹ thuật, số 114 (2016).
[7]. Luigi Uccioli, The Role of Footwear in the Prevention of Diabetic Foot Problem, The Diabetic Foot (2006).
[8]. Van Netten et al., Diabetic Foot Australia guideline on footwear for people with diabetes, Journal of Foot and Ankle Research 11:2 (2018) 2-14.
[9]. Wright, K. and Ojo, O., Foot care for residents with type 2 diabetes, Nursing and Residential Care 12 (2010) 585-589.
[10]. Viện Nghiên cứu Da Giầy, Nghiên cứu phương pháp thiết kế và làm phom mẫu phục vụ chiến lược chủ động trong thiết kế mẫu mốt và sản xuất của ngành Giầy Việt Nam, Mã: 70-07/R-D, 2008.