The Effect of Macro-Particle Blocking Plate on the Morphology of Coated CrN Film by Arc Cathodic Evaporation Method

Van Trung Trinh1,
1 Hanoi University of Science and Technology, Hanoi, Vietnam

Main Article Content

Abstract

Macro-particles often have a negatively affect on the properties of the coatings fabricated by arc cathodic evaporation. To prevent these macro-particles forming on the coating, a blocking plate can be used to filter out them. Disc-shaped blocking plates with different diameters of Df influence the number of macro-particles and the deposition rate of the coating film. The structure and morphology of macro-particles and coatings were investigated by optical microscope, stereoscopic optical microscope, electron microscope, energy dispersive spectrum (EDS), and XRD spectrum. The results show that the use of a larger diameter of the blocking plate reduces the density of macro-particles but also reduces the thickness of the coating as well as deposition rate of CrN film.

Article Details

References

[1] H. Olia, R. Ebrahimi-Kahrizsangi, F. Ashrafizadeh, and I. Ebrahimzadeh, The corrosion study of TiN, TiAlN and CrN multilayer coatings deposit on martensitic stainless steel by arc cathodic physical vapour deposition, vol. 6, 046425, Mater. Res. Express, 2019 http://doi/org/10.1088/2053-1591/aaff11.
[2] H. Olia, R. Ebrahimi-Kahrizsangi, F. Ashrafizadeh and I. Ebrahimzadeh, Comparative study of corrosion and corrosionwear behavior of TiN and CrN coatings on UNS S17400 stainless steel, vol. 36, pp. 403-412, Corros. Rev., 2018, http://doi/org/10.1515/corrrev-2017-0130.
[3] L. D’Avico, R. Beltrami, N. Lecis and S. P. Trasatti, Corrosion behavior and surface properties of PVD coatings for mold technology applications, vol. 9, 046425, Coating, 2019, http://doi/org/10.3390/coatings9010007.
[4] J. A. Araujo, R. M. Souza, N. B. de Lima, and A. P. Tschiptschin, Thick CrN/NbN multilayer coating deposited by cathodic arc technique, vol. 20, pp. 200-209, Mater. Res., 2017, https://doi.org/10.1590/1980-5373-mr-2016-0293.
[5] Daniela Dumitriu LaGrange, Thomas LaGrange, Antonio Santana, Raiko Jähnig, Ayat Karimi, Macroparticles formation in cathodic arc deposition of nitride coatings from TiNb alloy cathodes, vol. 35, 021309, J. Vac. Sci. Technol., A: Vacuum, Surfaces, and Films, 2017, http://doi/org/10.1116/1.4975638.
[6] P. D. Swift, Macroparticles in films deposited by steered cathodic arc, vol. 29, pp. 2025–2031, J. Phys. D: Appl. Phys., 1996, http://doi/org/10.1088/0022-3727/29/7/041.
[7] J. S. Khoozani, S. H. Hosseini and M. E. Fordoei, Comparison of the effect of arched and through magnetic field configurations in cathodic arc deposition, vol. 6, 046425, Surf. Eng., 2019, http://doi/org/10.1080/02670844.2019.1653598.