Design of DC/DC Boost Converter for Photovoltaic Systems Applications
Main Article Content
Abstract
Renewable energy sources are growing rapidly and becoming an important part of the national electricity system. The photovoltaic (PV) system is considered an appropriate option due to their advantages over traditional fossil energy sources. However, this energy source is affected affected by coincident variation of irradiance parameters and environment temperature, etc. Therefore, improving the efficiency of this PV system is always a topic interesting to scientists and many researches. In this paper, the authors focus on studying and designing DC/DC boost converter integrated the Maximum Power Point Tracking (MPPT) algorithm using hybrid method. The method of finding the maximum power point is developed based on many modern algorithms. Design equipment is analyzed, evaluated and gave positive results with high performance.
Keywords
Photovoltaic System, Boost Converter, MPPT
Article Details
References
[1] Jason Svarc, Most Efficient Solar Panels 2020, Clean Energy Reviews, https://cleanenergyreviews.info.
[2] N. T. N. Tran, M.Q. Duong, H. T. Yang, Integrated Transient Stability Analysis with Multi-Large-Scale Solar Photovoltaic in Distribution network, Journal of Science and Technology, Vol. 147(C), 2020, pp. 40-45.
[3] M. Q. Duong, H. Tran, and C. A. Hossain, Influence of elemental parameter in the boost and the buck converter, in 2017 IEEE Region 10 Humanitarian Technology Conference. IEEE, 2017, pp. 528–531.
[4] D. P. Hohm, M. E. Ropp, Comparative Study of Maximum Power Point Tracking Algorithms Using an Experimental, Programmable, Maximum Power Point Tracking Test Bed, Electrical Engineering Department South Dakota State University Brookings, SD 57007-2220.
[5] Minh Quan Duong, Gabriela Nicoleta Sava, Mircea Scripcariu, Marco Mussetta, Design and simulation of PI-type control for the Buck Boost converter, in 2017 International Conference on ENERGY and ENVIRONMENT (CIEM). IEEE, 2017, pp. 79-82.
[6] Aleksandar Prodic, Dragan Maksimovic and Robert W. Erickson, Design and Implementation of a Digital PWM Controller for a High-Frequency Switching DCDC Power Converter, IECON'01. IEEE, 2002, pp. 893-898.
[7] A. S. Ahmed, B. A. Abdullah, and W. G. A. Abdelaal, Mppt algorithms: Performance and evaluation, in 2016 11th ICCES. IEEE, 2016, pp. 461–467 https://doi.org/10.1109/ICCES.2016.7822048
[8] Brigitte Hauke, Basic Calculation of a Boost Converter's Power Stage, Application Report, Texax Instruments, SLVA372C - January 2014.
[2] N. T. N. Tran, M.Q. Duong, H. T. Yang, Integrated Transient Stability Analysis with Multi-Large-Scale Solar Photovoltaic in Distribution network, Journal of Science and Technology, Vol. 147(C), 2020, pp. 40-45.
[3] M. Q. Duong, H. Tran, and C. A. Hossain, Influence of elemental parameter in the boost and the buck converter, in 2017 IEEE Region 10 Humanitarian Technology Conference. IEEE, 2017, pp. 528–531.
[4] D. P. Hohm, M. E. Ropp, Comparative Study of Maximum Power Point Tracking Algorithms Using an Experimental, Programmable, Maximum Power Point Tracking Test Bed, Electrical Engineering Department South Dakota State University Brookings, SD 57007-2220.
[5] Minh Quan Duong, Gabriela Nicoleta Sava, Mircea Scripcariu, Marco Mussetta, Design and simulation of PI-type control for the Buck Boost converter, in 2017 International Conference on ENERGY and ENVIRONMENT (CIEM). IEEE, 2017, pp. 79-82.
[6] Aleksandar Prodic, Dragan Maksimovic and Robert W. Erickson, Design and Implementation of a Digital PWM Controller for a High-Frequency Switching DCDC Power Converter, IECON'01. IEEE, 2002, pp. 893-898.
[7] A. S. Ahmed, B. A. Abdullah, and W. G. A. Abdelaal, Mppt algorithms: Performance and evaluation, in 2016 11th ICCES. IEEE, 2016, pp. 461–467 https://doi.org/10.1109/ICCES.2016.7822048
[8] Brigitte Hauke, Basic Calculation of a Boost Converter's Power Stage, Application Report, Texax Instruments, SLVA372C - January 2014.