Date Published: 15/05/2017

Full Issue

Research article

Experimental Studies to Verify the Effect of Chip Shrinkage Coefficient on Cutting Forces and Surface Roughness in High Speed Milling of A6061 Aluminum Alloy
Thi Hoa Pham, Thi Bich Mac, Tien Long Banh, Duc Toan Nguyen
PDF
Page: 1-5
Dynamics and Control of a Four-Bar Mechanism with Relative Longitudinal Vibration of the Coupler Link
Van Khang Nguyen, Sy Nam Nguyen
PDF
Page: 6-10
Development of Plasma-Mig Hybrid Welding Process for Butt Joint Welding of Thick Plate Steel
Lam Tran, Van Anh Nguyen, Shinichi Tashiro, Manabu Tanaka, Thuc Ha Nguyen
PDF
Page: 11-15
The Influence of Electrical Parameters on the Penetration of Tungsten into the SKD61 Workpiece Surface in PMEDM using Tungsten Carbide Powder
Van Tao Le, Tien Long Banh, Xuan Thai Tran, Thi Hong Minh Nguyen
PDF
Page: 16-21
Modeling and Force Analysis of an Electrothermal Micro Gripper with Amplification Compliant Mechanism
Bao Lam Dang, Tuan Khoa Nguyen, Dang Thuan Nguyen, Hong Phuc Pham
PDF
Page: 22-27
Application of Sinusoidal Phase Modulation Technique for Infrared Spectrum Measurement by Fourier Transform Method
Giang Doan, Van Vinh Nguyen, Thi Phuong Mai Nguyen, Thanh Tung Vu
PDF
Page: 28-31
Optimal Parameters of Linear Dynamic Vibration Absorber for Reduction of Torsional Vibration
Xuan Truong Vu, Doan Dien Khong, Duy Chinh Nguyen, Duc Toan Nguyen
PDF
Page: 37-42
Effect of Quenching Media on Distortion of C-Ring Specimen Made by 100Cr6 Steel - Simulation and Experiment
Thi Xuan Tran, Van Tu Nguyen, Thi Chieu Le, Dinh Toai Vu
PDF
Page: 43-47
Dynamic Analysis of Complex Composite Tubes by Continuous Element Method
Thi Bich Nam Le, Manh Cuong Nguyen, Ich Thinh Tran, Pham Tuong Minh Duong, Quang Vinh Le
PDF
Page: 48-53
Fatigue Life Prediction under Multiaxial Variable Amplitude Loading Using a Stress Invariant Based Criterion
Quoc Huy Vu, Dinh Quy Vu, Thi Tuyet Nhung Le
PDF
Page: 54-58
Performance Evaluation of a 2D Front Tracking Method - a Direct Numerical Simulation Method for Multiphase Flows
Van Truong Vu
PDF
Page: 59-65
Crystallization Kinetics of Mechanically Alloyed $Al_{80}Fe_{20}$ Amorphous Powder
Thi Hoang Oanh Nguyen, Quoc Lap Tran, Ngoc Dieu Quynh Pham, Hong Thang Le, Thi Anh Nguyet Nguyen, Ngoc Huyen Pham, Hoang Viet Nguyen
PDF
Page: 66-70
Influence of Sintering Additives on the Porous Structure and Mechanical Properties of Porous Alumina
Minh Hai Le, Minh Duc Nguyen, Quoc Khanh Dang
PDF
Page: 71-75